Letting Stafford Home Services choose the right furnace for you is not only easy, it’s green as well! –We’re talking environmentally conscious, 90-95% AFUE Bryant units that lower utility bills, and are so technologically advanced that they use computer generated algorithms to know how long to run and how much heat to produce. Many of us consider the environment when making renovation decisions, and choosing a furnace is no exception. According to bryant.com, one of the best ways to protect the environment is to purchase energy efficient products that require fewer energy resources to operate. Not only will you make a difference to the environment, you’ll also save on operating costs. Make sure your heating and cooling products have high energy efficiency ratings such as SEER and AFUE.

Another great way is by using Energy Star products.  Stafford Home Service use many Energy Star products in their work. “ENERGY STAR promotes energy efficiency among residential appliances, because household appliances have the potential to contribute a great deal to air pollution. ENERGY STAR promotes energy efficient furnaces, heat pumps and air conditioners, and thermostats, among other products.” (source: www.bryant.com)

The 80% rating that used to be a great is now a thing of the past. Now units can be rated 90-95%. AFUE means Annual Fuel Utilization Efficiency. Your furnace’s AFUE tells you how much energy is being converted to heat.  For example, AFUE of 90 means that 90% of the fuel is being used to warm your home, while the other 10% escapes as exhaust with the combustion gases.

We all want lower bills, right?  Having Stafford Home Service install a Bryant gas furnace in your home you could lower you utility bill by 50%?  By knowing when to turn on and how much heat to produce Bryant Brand furnaces can reduce the amount of heat and energy you use. Dan from Stafford Home Service will help chose the right model for you.

These Bryant brand furnaces are so advanced they use computer generated algorithms to know how long to run and how much heat to produce. Older model furnaces used to run for a set amount of time even if the house was warm enough. These energy efficient furnaces are also multi-stage and are able to tell how long they should run, in order to be most efficient.  Let’s say it’s a sunny day in December, your furnace might never reach its highest heat stage, it can tell that it only needs to stay in stage one, the lowest amount of heat. However, as the sun goes down it will also be able to tell if it is more efficient to jump to stage three, the highest amount heat, rather than going through all three stages.

One thing he explained is how he was going to mount the basement ducts a couple inches lower then I had first assumed. He said these critical few inches would make the ducts that much more quiet, as they would better isolate the vibrations of ducts and movement of floor. Brilliant! He was also very concerned with the placement of vents for cosmetic and functional reasons. He explained many situations where ducts would be a problem. If it were up to me I would have ended up choosing locations that would have essentially heated the outside and the furniture. Nothing like a great HVAC contractor to save the day!

Next was the Stafford Electric team. Kris came in on Thursday and walked through the entire space with me and Jason from Stinson Builders. Even though we had blueprints (do they still call them that?) and had previously discussed many of the options, Kris insisted on walking through every detail again and making sure we were all on the same page and that we were moving forward in the best possible way. As we walked through, Kris proposed new options that were better then the old, like recessed lighting in the basement guest bedroom and workout/craft area. Jason and Kris pointed out that those spaces would benefit by having finished ceilings. I am so happy that I began this process with Stinson Builders; Jason’s subcontractors are friendly, committed to the job and my satisfaction, and unbelievably helpful.

One exciting idea Kris cooked up, for the rest of the basement was to put in conduit and cage lights, in between the floor rafters Something like this (but cheaper, more industrial, and steel instead of brass):

This is perfect for the industrial look I am going for. I had the ceiling spray painted with BIN paint which has shellac in it (the only thing sure to lock out the lingering dog and cigarette smoke odors.) which I tinted a light blue-grey. I think it’s going to look great. Thanks Kris!

As we walked around the space I got a glimpse at the complexity of a good electrician‘s job. The melding of practicality, ease of use, efficiency, code compliancy, cosmetics and the like creates for a difficult terrain. Make sure you have a great firm like Stafford Home Services’ electric department to navigate the landscape or you may find yourself pulling things out later (at much higher expense), and being disappointed with the results.

One simple, electrical Green Renovation solution that Stafford is installing is dimmer switches at all locations. (there are even 3-way, adjustable light switches!) Did you know light dimmer switches were Green? Well they are. Kris and Dan told me about a Green Home workshop they attended that trained electricians and home services on going Green. Evidently the human eye only needs about 80% of a room’s full lighting. They were shown a demo and said they could not tell the difference, once their eyes adjusted. I assume that’s a 20% savings in lighting bills! Nice!

As we walked through the space, Kris stopped one of his electricians and had him move a flush, floor-mounted electrical outlet. It was just a rotation of a outlet that already had been installed. The electrician did not look happy but Kris insisted. I went back later and saw why: to rotate the box, there had to be new framing to support each unit. To think, here they are making more work for themselves, work that I would not have thought of until another contractor was done and gone, and they doing it just to make sure the aesthetics are just right. That’s the kind of electrician I want!

All said and done, this has been a good week. Stay tuned next week for updates on the Green electrical and Green HVAC installations.

-M

• Use sand mix. Some places do not sell this and will try to sell you morter mix if you ask for sand mix. Don’t do it. The sand mix is the ideal thing for the small cracks in the existing concrete floor and the 1-2″ depth.
• I didn’t use a bonding agent and it looks fine. To better seal the new concrete to the old, the concrete guys recommend mixing this in.
• Get a mixer! I rented an electric mixer that we brought right into the basement. It was $40 for the day and worth every penny. Mixing concrete is hard work!
• Follow the instructions and then test it, for each batch, before using. Batch to batch inconsistencies make for necessary testing.
• The wetter the mix, within reason, the harder it sets and the longer it takes.
• Rent, or buy tools. Get a rough trowel and a smooth. To go more quickly, get a few more rough trowels and have multiple people going at it at once. It’s tough for more then one, possibly two, working on the finish trowel.
• Expect to be very sore. Icing a floor with stone frosting is hard work! That and you are hunched over for hours. Stretch when you are done and drink water!
• Wear gloves and masks. It’s dusty work.
• It took four of us 7 hours. We were all rookies though.

Good luck!

• Emily Anleu (my wonderful girlfriend and biggest helper ever!)
• Mike Livingston
• Jeff Klug
• Michael Parker
• Clint
• Eric Hall (of Avatar Training Studio)
• Nick Buettner
• Molly Green
• Blake Darsow
• Suzanne Pfeiffer

I am so thankful for all of your help!!!

It was unbelievably hard work. The previous builder must have had stock in a nail company because I have never seen so many nails used in all my life. It was ridiculous.

This is what we did:

• Removed basement walls including a 20″ long organization center and a cedar closet. Down to the concrete block.
• Removed basement ceiling
• Removed all flooring on 1st floor except original oak (in bathroom and hallway)
• Removed ceiling in kitchen and back addition.
• Removed walls in Kitchen and back addition.
• Removed rear addition walls.
• Removed rear addition bathroom.
• Removed rear addition closet.
• Moved Rear addition windows, removed one.
• Removed kitchen cabinets and sink
• Removed carpeting from front addition.
• Removed carpeting from rear addition.
• removed tile from kitchen.
• removed Kitchen pantry.
• Removed 3rd bedroom closet.
• Removed Stairway walls.
• Removed plumbing from rear bathroom.
• Removed sewer line, all the way to the main stack.
• Removed Stairway.
• Removed chimney.

So far I have Phillip Broussard from Architron as my St. Paul-based architect and JasonStinson from Stinson Builders, Inc. in Minneapolis, as my general contractor. We will also be working with Stafford Home Services for Electrical, HVAC (for a new Furnace, AC unit and ducts), home sound installation, and the new Media Room; and Landscape Architects for Landscape design and Landscape work. They all do amazing work, so check their sites out.